34 receiver

Post by **2receivers** » Mon Feb 12, 2007 6:04 am

Hello experts,
Every day I read these forum posts to learn,learn & learn about a 34 reweld trying to get enough courage to start mine. I read these every day but have never seen any thing about the holes in these guys. Is their dimention as critical as the overall dimentions of the
receiver?[diameter,depth ,etc]
Anything else someone can contribute?

Thanks=========Frank

Post by **helix60** » Mon Feb 12, 2007 8:35 am

Yes hole locations are critical on the 34. There is little roomfor tolerance. If the GS is either too far forward or backwards the FCG wil not work. The sear pin hole and the safety hole mustalso be correct in order to retain and use the safety.

Look around the site Orin (ie 762X51) posted a limited drawing of the 34 dimensions.

Regards,
Heli

Post by **2receivers** » Mon Feb 12, 2007 1:44 pm

Helix-----thank you for reply & your info

Post by **762x51** » Mon Feb 12, 2007 4:23 pm

Here are the basic dimensions..Click on drawing for a better view.

Regards,
Orin

Post by **2receivers** » Mon Feb 12, 2007 4:35 pm

Olin--thank you for the response & yes pilgram there is a difference

Post by **2receivers** » Mon Feb 12, 2007 4:38 pm

What happened there????????

Post by **762x51** » Mon Feb 12, 2007 4:50 pm

2receivers wrote:What happened there????????

I thought you were just VERY happy to get the drawing......

ORIN

Post by **drooling idiot** » Mon Feb 12, 2007 6:30 pm

i thought maybe he had a studder ..........
common mistake i think you hit the post button multiple times , I've deleted the extras.

Post by **2receivers** » Mon Feb 12, 2007 6:52 pm

Thanks Mr. delete man----- that saves me and further-- yes Orin I was glad for the response

Post by **stifeout** » Sat Feb 24, 2007 7:15 pm

Thanks Orin!!

www.MG42.us

34 receiver

34 receiver

34 receiver

34 receiver

NA

Re: NA

NA