WTK Any good or bad news about XMG M16/mg34 made by BRP guns
-
- Obergefreiter
- Posts: 20
- Joined: Wed Jan 24, 2007 8:07 pm
- Location: South Dakota and Wyoming
WTK Any good or bad news about XMG M16/mg34 made by BRP guns
Does any body have any experiece with these good or bad. I have the bug to buy something, would like to get both a Mg34 and MG42 but can not have it all, the XMG seems like a good compromise, shoots full auto with a M16 lower but is still mostly an original german gun, but a original WWII German kit built into a MG42 would work also for reenactments.
I recently got an XMG and the first trip out was successful. I had a few light primer strikes the first 150 rounds or so, but after adding more lube the light strikes dwindled down to less than 1%. This was on a F/A Colt lower. It was a lot of fun and so far shoots great and sounds like an MG34!
- Attachments
-
- Mobile07_XMG.jpg (215.7 KiB) Viewed 1284 times
I have had one for some years. It was a bit finicky at first, but once set up it runs excellent.
It has all the advantages of a F/A MG34 without the $'s cost. If you have a FA 16 then it is the way to go. It actually runs very fast in semi mode as the trigger setup is very light and works well on the MG3 tripods.
I don't know if they have any in stock, but they are built nicely.
Conical One
l
It has all the advantages of a F/A MG34 without the $'s cost. If you have a FA 16 then it is the way to go. It actually runs very fast in semi mode as the trigger setup is very light and works well on the MG3 tripods.
I don't know if they have any in stock, but they are built nicely.
Conical One
l