Yugo Parts Kit

morvedahl · Post by **morvedahl** » Thu Feb 08, 2007 8:57 pm

Got my parts kit a couple of weeks ago and just finaly got around to posting pics. The barrel shrowd has a hole and dent in it that look like they are from bullets. Overall the kit is in good condition. I even got the buffer tabs and the rivet for the cam section. There also is a substantial amount of the cam section included and ironicaly the only salvagable part of the receiver. I was thinking about butting the receiver cam section up for sale if there was any interest. Now to get to building.

Post by **avman** » Thu Feb 08, 2007 11:18 pm

I got one from Sarco with a bullet hole right on the front sight. I sent it back to them for another kit but they are now out of them.

Post by **Bil** » Fri Feb 09, 2007 12:54 am

If you are building this,why dont you want the cam section? If you decide to sell it,I would be interested. ---bil

Post by **wilfx** » Fri Feb 09, 2007 6:30 am

I would also be interested in the cam section.

morvedahl · Post by **morvedahl** » Fri Feb 09, 2007 1:09 pm

This is my second parts kit that I bought for the spare barrle mostly. I dont plan on doing to much with the receiver sections that I have. The other receiver section I have has a good nose to weld in a new barrel nut bushing but no cam section so I would have to cut this cam off welld it to the other and then still weld in the barrel nut and rear receiver section which i do not have. I am planning on seeing what new receivers come out in the hopfully near future. Does it seam like a bad move to geet rid of a good cam section?? Will i ever get one again??

Post by **longhorn109** » Fri Feb 09, 2007 1:33 pm

Until you have a working receiver in your hand don't sell anything. You could end up kicking yourself if you sell it before you have a working gun. Thats the sort of "buy high sell low " thing I am good at.

Village · Post by **Village** » Fri Feb 09, 2007 6:19 pm

avman wrote:I got one from Sarco with a bullet hole right on the front sight. I sent it back to them for another kit but they are now out of them.

Woah, they're out of M53 kits already?!! Guess it was a good thing I got my two in time.

Post by **Bil** » Fri Feb 09, 2007 8:25 pm

Longhorn is right-if you are going to build a gun,wait till you are done to dispose of anything that might be handy.There is a reason I wanted the cam section-they can be hard to find. ---bil

morvedahl · Post by **morvedahl** » Sat Feb 10, 2007 12:05 am

THanks for the input i think i will hang on to this cam section.

Mule · Post by **Mule** » Sat Feb 10, 2007 11:44 am

How long did you have to wait? Mine was ordered around Jan 30th and they told me it's still on b.o.
I think the bullet holes add character to make it stand out in the crowd. IMO.....