Bolt Rollers
Bolt Rollers
Does anyone know how to reinstall the bolt rollers onto the bolt with the retainer?
Re: Bolt Rollers
OK, i finally after a little bit finally got the roller reassembled. However, what a pain. All it takes is patience.
-
JBaum
- Administrator
- Posts: 3163
- Joined: Sat Mar 12, 2005 8:41 pm
- Anti-spam: Mg42
- Location: NE Ohio
- Contact:
Re: Bolt Rollers
Boy, if I could sell boxes of patience, I could make a living just off the guys here. 
None of this stuff is easy, but it's all doable, and much easier once you've done it.
Enjoy.
None of this stuff is easy, but it's all doable, and much easier once you've done it.
Enjoy.
Re: Bolt Rollers
You learn the tricks as you tag along!
The trick is to press the roller towards the "o"-spring and at the same time use a sharp object (I use a scalpel) and press the end of the spring inwards. In the end it will snap shut!
The trick is to press the roller towards the "o"-spring and at the same time use a sharp object (I use a scalpel) and press the end of the spring inwards. In the end it will snap shut!
Re: Bolt Rollers
Yes, that is exactly what I ended up doing. Of course that was after trying it several other ways first.