Dear Gentlemen,
Does anybody know where you can buy replacement bolt rollers and clips for the MG34 bolt ?
Marstar have them, but at $20 each for the bolt rollers and $10 each for the clips thats mighty expensive.
Regards Craig.
MG34 Bolt Rollers and clips Source
-
- Hauptgefreiter
- Posts: 13
- Joined: Fri Mar 03, 2006 8:39 am
- Location: England and Austria
Re: MG34 Bolt Rollers and clips Source
dont know about rollers but the clips are aveable from bearing supply houses
-
- Hauptgefreiter
- Posts: 13
- Joined: Fri Mar 03, 2006 8:39 am
- Location: England and Austria
Re: MG34 Bolt Rollers and clips Source
Thank you Sir,
Do you have a bearing supply house you can recommend because my bolt is in Austria and I am in England for three months and I don't know the size. If anybody who knows for sure the correct size and can get a source for them I would be greatful to buy some if somebody in the states is prepared to ship them here.
Marstar are asking $10 Canadian each
Regards Craig.
Do you have a bearing supply house you can recommend because my bolt is in Austria and I am in England for three months and I don't know the size. If anybody who knows for sure the correct size and can get a source for them I would be greatful to buy some if somebody in the states is prepared to ship them here.
Marstar are asking $10 Canadian each
![Shocked :shock:](./images/smilies/icon_eek.gif)
Regards Craig.
- longhorn109
- Oberstleutnant
- Posts: 487
- Joined: Fri Mar 24, 2006 7:10 pm
- Location: UK
Re: MG34 Bolt Rollers and clips Source
Is everyone from continental Europe coming to England for 3 months? OK maybe not everyone but you are board member number 2 now. Is there something exciting going on?
The only thing that helps me maintain my slender grip on reality is the friendship I share with my collection of singing potatoes.
Re: MG34 Bolt Rollers and clips Source
It was supposed to be a surprise!! I guess now you know-we are ALL coming over to see you!!!I hope you have a tea service for 564 people [so far] ---bil
![Confused :?](./images/smilies/icon_confused.gif)
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
- longhorn109
- Oberstleutnant
- Posts: 487
- Joined: Fri Mar 24, 2006 7:10 pm
- Location: UK
Re: MG34 Bolt Rollers and clips Source
Oh crap
I am going to need more cups and I had best gets some crumpets in as well. Probably need another kettle as well oh and I had better order extra milk and coffee someone always wants coffee instead of tea... arrgh not enough time. Anyone want sugar?
![Shocked :shock:](./images/smilies/icon_eek.gif)
The only thing that helps me maintain my slender grip on reality is the friendship I share with my collection of singing potatoes.
Re: MG34 Bolt Rollers and clips Source
Roughshooter-if you can find the correct sizes,I will look for a source here.I would also be willing to ship them to you,just need the info on sizes. ---bil
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
-
- Hauptgefreiter
- Posts: 13
- Joined: Fri Mar 03, 2006 8:39 am
- Location: England and Austria
Re: MG34 Bolt Rollers and clips Source
Dear Bil,
Thank you for your kind offer.
I have bitten the bullet and ordered 4 clips from Marstar Canada for the grand total of $32 Canadian. What a rip off but at least I will have the correct sizes. When I get them I shall photograph them and put the sizes on the forum so all can benefit.
I could not find a source for the bearing for a while, I tried Sarco and Northridge but neither had any. The guy at Sarco even told me he has many bolts without rollers himself. For those that may be interested finally got a set from TNW for just $15 each, but thats still $60 for the set of four required.
As regards the tea party well I'm alreaday in England most of the time....I'm English. But about 3 years ago I realised that the UK was just way too restrictive so I moved all my collection to Austria and now have Austrian Citizenship and a collectors permit and licence to carry. Things are much better out there for the serious collector.
Regards Craig.
Thank you for your kind offer.
I have bitten the bullet and ordered 4 clips from Marstar Canada for the grand total of $32 Canadian. What a rip off but at least I will have the correct sizes. When I get them I shall photograph them and put the sizes on the forum so all can benefit.
I could not find a source for the bearing for a while, I tried Sarco and Northridge but neither had any. The guy at Sarco even told me he has many bolts without rollers himself. For those that may be interested finally got a set from TNW for just $15 each, but thats still $60 for the set of four required.
As regards the tea party well I'm alreaday in England most of the time....I'm English. But about 3 years ago I realised that the UK was just way too restrictive so I moved all my collection to Austria and now have Austrian Citizenship and a collectors permit and licence to carry. Things are much better out there for the serious collector.
Regards Craig.
Re: MG34 Bolt Rollers and clips Source
I think Bil failed to mention it was a 'Boston style' tea party we were envisioning!Bil wrote:It was supposed to be a surprise!! I guess now you know-we are ALL coming over to see you!!!I hope you have a tea service for 564 people [so far] ---bil![]()
-
- Hauptgefreiter
- Posts: 13
- Joined: Fri Mar 03, 2006 8:39 am
- Location: England and Austria
Re: MG34 Bolt Rollers and clips Source
Dear Bil,
I actually phoned my order through yetsreday to Marstar and they have run out of clips ! TNW Firearms have them on back order but this situation seems ludicrus.
Please can any board member help here providing a photo of the clips and their sizes, as forum member Bil has kindly offered to ship them to me if somebody can give the correct sizes.
Regards Craig.
I actually phoned my order through yetsreday to Marstar and they have run out of clips ! TNW Firearms have them on back order but this situation seems ludicrus.
Please can any board member help here providing a photo of the clips and their sizes, as forum member Bil has kindly offered to ship them to me if somebody can give the correct sizes.
Regards Craig.