Page 1 of 1
AA Tripod with Bum Leg
Posted: Tue Jul 14, 2009 12:25 pm
by Franz 1796
Anyone ever take apart the pivot mechanism on a post war AA Tripod leg? I have a tripod with one leg that does not lock in place. Haven't taken it apart yet so diagnose the problem, but wanted to see if it's been done before. If it can't be repaired, I guess I'll just use a strap to hold it in the extended position when in use.
Re: AA Tripod with Bum Leg
Posted: Tue Jul 14, 2009 2:00 pm
by DARIVS ARCHITECTVS
Whatever it is, it CAN be fixed.
Re: AA Tripod with Bum Leg
Posted: Tue Jul 14, 2009 3:20 pm
by bmwr12
Yes it is very easy. Are you having a problem with the height adjustment or the leg angle?
Re: AA Tripod with Bum Leg
Posted: Tue Jul 14, 2009 6:58 pm
by Franz 1796
Leg angle is the problem. The lever that is used to move the leg and then holds the leg in the position you select does not lock the leg. The leg moves freely at all times. I'm assuming there's a flat spring of some sort in the mechanism but haven't taken it apart yet.
Re: AA Tripod with Bum Leg
Posted: Wed Jul 29, 2009 11:16 am
by Pug42
Hmmm... I had one of these and took it apart (very easily) to strip and repaint dark grey... but it proved imposssible to reassemble, and several of my reenacting colleagues had a go too. Eventually I gave it to a mate who works for a gun dealer and he made a special tool to hold the spring in its compressed state and in position during reassembly... so do-able but be warned!
Re: AA Tripod with Bum Leg
Posted: Thu Jul 30, 2009 9:49 pm
by Franz 1796
That's why I asked here first before I jumped in with both feet. If it's going to be a pain to repair, I will just strap the bad leg to the two good legs for support. Thanks.
Re: AA Tripod with Bum Leg
Posted: Fri Apr 29, 2016 9:24 am
by Waffentag
Help, I got one also with a bad leg. It is the height adjustment. One leg started slowly collapsing as I was shooting.
Anyone know how to fix it.
Pat
Re: AA Tripod with Bum Leg
Posted: Fri Apr 29, 2016 3:00 pm
by magnet69
For a temporary fix, you could put some sort of adjustable pipe clamp around it and tighten when you get it adjusted to the desired level. I put 3 clamps on mine just for safety reasons when I attach my 1919a4 Full auto with 3 ammo can mount because of weight.
Re: AA Tripod with Bum Leg
Posted: Fri Apr 29, 2016 3:45 pm
by JBaum
The AA tripod manual explains how to disassemble, assemble, and adjust the hinged part and the extension part of tripod legs.
Re: AA Tripod with Bum Leg
Posted: Sat Apr 30, 2016 9:47 am
by Waffentag
Problem solved, the lever clamp part that holds the telescoping leg has a cog wheel like nut that can be turned to tighten the tension. There is one lager hole that had what I thought was a detent button to allow one to tighten the cog wheel nut. I put my reading glasses on and discovered that it was a buggered screw. I was able to get it out, tighten the nut for tension, recut the screw head and put it back in.
Problem solved, although I like the pipe clamp idea for safety.
Pat