Page 1 of 1
Mg-42 .308 barrel drawings
Posted: Thu Oct 25, 2018 4:32 pm
by SovietTwins
Hi there! Is anyone have MG-42 barrel blueprints or drawings?
Will be happy for any info or link.
Thanks!
Re: Mg-42 .308 barrel drawings
Posted: Fri Oct 26, 2018 7:38 am
by Jaredrlewman
Good luck, we had to reverse engineer our own for the 762x39 barrels we are making. Couldnt find anyone with prints.
Re: Mg-42 .308 barrel drawings
Posted: Sun Oct 28, 2018 5:07 am
by SovietTwins
Well, i've a big experience In re-barrel process, so it is not a problem to make it "from scratch", or make a some reverse process for it.
The biggest problem in .308 barrel making, is big diameter "ring", between barrel extention and all other length of the barrel.
My friend made a new barrel from .308 blank with dia ~30mm, by using a separated ring, witch was placed on biggest dia, and TIG welded. I plan to do that too. (I have one DIY argone welding chamber, to get a stable welding results).
I have a headspace gauges, so it will be not a problem to get a relaible .308 barrel.
Will left a blueprints here, when i finish it.
Re: Mg-42 .308 barrel drawings
Posted: Mon Oct 29, 2018 12:24 pm
by 42rocker
Good Luck with everything.
Later 42rocker
Re: Mg-42 .308 barrel drawings
Posted: Mon Oct 29, 2018 10:40 pm
by JBaum
SovietTwins wrote:
I have a headspace gauges, so it will be not a problem to get a relaible .308 barrel.
Will left a blueprints here, when i finish it.
That would be great. I am sure a lot of people will like that.
С наилучшими пожеланиями,
John