7.62x39 pre-sales list

[Jaredrlewman]

Chrome lined barrels are being tested now. We are opening up a pre-sales list. We will begin with customers who want to supply their own top cover, feed tray, and barrel extensions as this will cut a bit of cost off the kits on both sides. See breakdown below.

Modify customer supplied parts, supply booster assembly, supply bolt head, supply and headspace barrels.
$650 + $300 per barrel.

Our barrels are 4150, chrome lined, and parkerized.

The booster assembly is totally adjustable to allow you to dial in the gas to each gun, also allows cyclic rate adjustments. The kits DO run semi auto guns as well. These are a true drop in conversions, no mods to your springs or your gun. Drop the parts in/on and run 7.62x39. The conversion uses original MG42/M53/MG3 belts, it does like tighter belts as the rounds tend to fall out of looser belts. The belts are easily pinched to tighten them up as you load the ammo.

We will be placing our barrel order based on the pre-sale list. The barrels are the longest item to get and once we have a list of customers we can get lead times on the barrels.


Email Jessica to be placed on the list.
Name, phone number, email address, and how many barrels.
Jessica@lewmanarmsmanufacturing.com
You will be updated from there VIA email.

Once we do the 1st batch of customer supplied parts kits we will open up general sales with us supplying all the parts. Stay tuned for those kits availability.

https://www.youtube.com/watch?v=Uc-RPv7WtUM

[Jaredrlewman]

Forgot to post it, the top cover and tray we are using for the mods are the 8mm ones. I have not started messing with the 308 parts mods. As for boosters, it is not a standard booster.

[42rocker]

Way to go on this. Good Luck with your sales.

Later 42rocker

[Jaredrlewman]

https://www.youtube.com/watch?v=pbOF9ggWNF0