MG34 PARTS IDENTIFICATION

[tomcatshaas]

This post has been edited by 42rocker on 8/26/2013 to try to restore some of the photos. Several are still missing. If you have one or more please post or forward to 42rocker or salt6. Thanks -- Please note that the names numbers are not perfect just best I can do at this time.
Also there are several photos at the end of this that I just added. They don't match perfect but might be better than nothing. Also if they are your pics that I ripped from someplace, please let me know so we can give photo credit or if needed remove because of copyright problems. 42rocker

Just found this thread in another area.

http://mg42.us/viewtopic.php?f=17&t=4456

Has a lot more parts and labels that are correct.




B1 Receiver
B2 Cam, lower
B3 Cam, upper
B4 Rivets of the Cams
B5 Detent Pin
B6 Rivet Pin for the Detent
B7 Coil, Spring for the Detent
B8 Recuperator
B9 Coil Spring for the Recuperator
B10 Rivet Pin
B11 Dust Cover
B12 Cylinder Pin for the Dust Cover
B13 Coil Spring for the Dust Cover
B14 Cocking Handle
B15 Ejector Plate (XG3446)
B16 Countersunk Screw for Ejector Plate (not shown)
B17 Safety Lever
B18 Safety Rest
B19 Coil Spring for Safety Rest
B20 Rivet Pin for Safety Rest
B21 Trigger Lever
B22 Pin for Trigger Lever
B23 Coil Spring for the Trigger Lever
B24 Angled Lever
B25 Rivet Pin for the Angled Lever
B26 Mounting Pin
B27 Rivet Pin for the Mounting Pin (not shown)
B28 Buffer Detent
B29 Coil Spring for the Buffer Detent
B30 Rivet Pin for the Buffer Detent
_______________________________________________________________________________________

C1 Grip
C2 Trigger Rod
C3 Trigger
C4 Trigger Detent
C5 Coil Spring for Trigger Detent
C6 Rivet Pin for Trigger Detent
C7 Coil Spring for Trigger
C8 Spring Head
C9 Disconnector
C10 Coil Spring for Disconnector
C11 Rivet Pin for Disconnector
C12 Detent Hook
C14 Rivet Pin for Detent Hook
C15 Coil Spring for Detent Hook
C16 Down Pusher
C22 Grip Plate, right
C23 Grip Plate, Left
C24 Holding Screw, shorter
C25 Holding Screw, Longer
C28 Split Bushing
C29 Split Pin
C26/27 Rivet Screw

______________________________________________________________________________________



Bolt shown with Early Firing Pin Nut

D4 Bolt Head
D5 Ejector
D6 Coil Spring for Ejector
D7 Rivet for Ejector
D8 Ejector Pin
D9 Rivet for Ejector Pin
D10 Firing Pin Lever
D11 Coil Spring for Firing Pin Lever
D12 Rivet for Firing Pin Lever
D13 Extractor
D14 Retainer for Extractor
D15 Coil Spring for Retainter
D16 Firing Pin
D17 Coil Spring for Firing Pin
D18 Firing Pin Spring Retainer
D19 Lower Roller
D20 Upper Roller
D21 Spring Ring
D22 Bolt Housing
D23 Firing Pin Nut
D24 Firing Pin Nut , Complete



D23T1 Firing Pin Nut, Complete
D24T1 Firing Pin Nut
D25T1 Firing Pin Detent
D26T1 Coil Spring for Firing Pin Detent
D27T1 Rivet for Firing Pin Detent

__________________________________________________________________________________________

A1 Barrel Housing
A2 Front Threaded Bushing
A3 Sight Holder
A4 Sight
A5 Threaded Pin
A6 Detent Pin For Sight Holder
A7 Coil Spring for Detent Pin
A8 Rivet for Sight Holder
A9 Detent
A10 Coil Spring for Detent
A11 Rivet for Detent
A12 Detent Spring
A13 Rivet for Detent Spring
A41 Recoil Bushing
A42 Nozzle
A43Flash Suppressor


______________________________________________________________________________________________________________



A14 Screw for Detent Spring
A17 Knob
A18 Locking Piece
A19 Bolt Catch
A20 Coil Spring for Bolt Catch
A21 rivet for Bolt Catch
A22 Receiver Detent
A23 Coil Spring for Receiver Detent
A24 Rivet for Receiver Detent
A25 Detent Pin
A26 Coil Spring for Limit Pin
A27 Push Button
A28 Sight Bar
A29 Sight Slide
A30 Sight Button
A31 Button Rest
A32 Coil Spring for Button
A33 Cylinder Pin for Sight Bar
A34 Aircraft Sight
A35 Leaf Spring
A36 Rivet for Aircraft Sight
A37 Sight Pin
A38 Rivet for Sight Pin
A39 Pressure Pin for Sight Bar
A40 Coil Spring for Pressure Pin

____________________________________________________________________________________________________________



A15 Circle Sight Holder
A16 Rivet For Circle Sight Holder


____________________________________________________________________________________________________________


Different pic but best I have at this time

Buttstockparts.jpg (7.56 KiB) Viewed 9709 times

E1 Buffer Housing
E2 Buffer
E3 Coil Spring for Buffer
E4 Retaining Spring
E5 Disk
E6 Back Closing Screw
E7 Buttstock Bushing
E8 Buttstock Detent
E9 Coil Spring for Buttstock Detent
E10 Cylinder Pin
E11 Buttstock
E15 Buttstock Bolt

[walkerheaders]

thanx for posting this blow-up. best i've ever seen and a big help to all.

[Barrel26]

Thanks for posting the parts identification photos. These are by far the best I've seen !

[gfarq]

Thought I would re post this Ejector Plate Print in the Stickies section so it doesn't get lost in the threads of normal postings. on the parts lists it is "B15"

EJECTOR PLATE.PDF

MG34 Ejector Plate (B15)

(274.85 KiB) Downloaded 465 times

[Som91]

Do you have any from the top cover (belt feed) and bipod.

[42rocker]

one of the pics

Does anyone have any of the others? I'm looking through my old files.

Later 42rocker

[landser]

Anyone have a detail photo of TNW trigger assembly? what happed to all these part photo's in this sticky?
Jeff

[42rocker]

This site has lost pics for several reason.
1st site got hacked bad
2nd a software upgrade got a few
3rd like in this thread the pics were not uploaded to the site. The poster used another site to host the pics. Then either the person moved on to other things and the site took the pics down or whatever.

Personally I like it when folks post pics to this site. That way unless this site has problems the site will always have the pics. I try to keep back ups in case of problems.
I'm working on getting some of these pics back and reposted.

Later 42rocker

[anjongni]

I could scan the original TNW paper that shows the dimensions of the holes, etc. but they would probably send that to you. I could take pictures of any details you want of my spare trigger....Phil

[42rocker]

Well a few updates in this thread. If you have any pics that would help out in this thread please post or pm me about them and I'll redo some more.

Later 42rocker