correct waritme buttstock color?

[kansasrebel]

Ok, in the first picture the buffer on the bottom is the buffer that was in the buttstock that was posted previously. In the second picture it's on the right. I replaced it with the buffer pictured on the top of the first picture and the left side in the second picture.

[kansasrebel]

ok, somehow the pictures were swapped but I think you can get the drift of what I'm getting at.

[Bil]

Yes,correct! When you load pics on this site,do it in reverse order of what you want,or write in the little comment space. Looks like you are making progress! ---bil

[42rocker]

Note the end of the buffer that does not have the s-### it is more or less square which differs from the rounded edge one. The square like end of the buffer is normally on the end of a German buffer.
There are several nice photos on this website about this. Also look for WaAmp's which do show up, not allways.
I "think" that you have a German buffer with a German butt stock who's wire wrap has been redone at a later time. Again I think that's a nice color on the butt stock. You also have a yugo buffer (s###) that does not fit as well, large gap.

Since you have learned how to post pics throw up a few more. There are some great folks on this website that can help you out on this stuff. Also try the search button and you will find a lot of great info from those that were willing to share that went before us.

Good Luck

Later 42rocker

[Bil]

viewtopic.php?f=39&t=1688 good stuff here. ---bil

[42rocker]

see the great stuff that you can find when you use the search button....

Thanks Bil

Later 42rocker