Bolt Rollers
Posted: Fri Jan 30, 2009 8:50 pm
Does anyone know how to reinstall the bolt rollers onto the bolt with the retainer?
Page 1 of 1
Re: Bolt Rollers
Posted: Sat Jan 31, 2009 3:18 pm
OK, i finally after a little bit finally got the roller reassembled. However, what a pain. All it takes is patience.
Re: Bolt Rollers
Posted: Sat Jan 31, 2009 4:10 pm
Boy, if I could sell boxes of patience, I could make a living just off the guys here. 
None of this stuff is easy, but it's all doable, and much easier once you've done it.
Enjoy.
None of this stuff is easy, but it's all doable, and much easier once you've done it.
Enjoy.
Re: Bolt Rollers
Posted: Sat Jan 31, 2009 5:39 pm
You learn the tricks as you tag along!
The trick is to press the roller towards the "o"-spring and at the same time use a sharp object (I use a scalpel) and press the end of the spring inwards. In the end it will snap shut!
The trick is to press the roller towards the "o"-spring and at the same time use a sharp object (I use a scalpel) and press the end of the spring inwards. In the end it will snap shut!
Re: Bolt Rollers
Posted: Sat Jan 31, 2009 8:36 pm
Yes, that is exactly what I ended up doing. Of course that was after trying it several other ways first.