the primers looked fine and they all went bang. the only problem I had was with the trigger. I am sure a little mod to the disconect is all it is. I guess I'll stick to the reloads for now so I can finally tear up some turf with this thing.
It works
-
Jason
It works
finally just reloaded 100 rounds and it shot fine
the primers looked fine and they all went bang. the only problem I had was with the trigger. I am sure a little mod to the disconect is all it is. I guess I'll stick to the reloads for now so I can finally tear up some turf with this thing.
the primers looked fine and they all went bang. the only problem I had was with the trigger. I am sure a little mod to the disconect is all it is. I guess I'll stick to the reloads for now so I can finally tear up some turf with this thing.
- Attachments
-
- first firing 002.jpg (53.26 KiB) Viewed 1430 times
-
TOM R
- Field Marshal
- Posts: 3355
- Joined: Wed Mar 09, 2005 3:11 pm
- Anti-spam: Mg42
- Location: ESCAPED FROM Nazi Jersey, !!!
let me be the first to say CONGRADULATIONS 
hopefuly drooling idiot and I will be done soon 
Last edited by TOM R on Sun May 15, 2005 9:54 am, edited 1 time in total.
Great men are born in fire, it is the privilege of lessor men to light the flame, no matter the cost
FOR M60 GOTO http://WWW.M60MG.COM
nra lifer
mvpa 31698
46 cj2a
54 m37
56 CJ3B U.S. Navy
t24/m29 weasel
FOR M60 GOTO http://WWW.M60MG.COM
nra lifer
mvpa 31698
46 cj2a
54 m37
56 CJ3B U.S. Navy
t24/m29 weasel
-
Karbinator
Fantastic !!
How does it feel on that stand?
Have you popped off some in Rapid succesion---successfully?
Also, on your previous post--about breech/barrel space, and the adjustment
you were going to do to the bolt rollers (?)...... what did decide that worked out
the primer issue? High interest on this subject jason.... clue me in.
I'm Thinking salt needs to switch out your GUN DUMMY signia, and Bump you up the
ladder!
good going jason,
skip
How does it feel on that stand?
Have you popped off some in Rapid succesion---successfully?
Also, on your previous post--about breech/barrel space, and the adjustment
you were going to do to the bolt rollers (?)...... what did decide that worked out
the primer issue? High interest on this subject jason.... clue me in.
I'm Thinking salt needs to switch out your GUN DUMMY signia, and Bump you up the
ladder!
good going jason,
skip
-
Jason
;
Karbinator, the tripod is cool as he## and as for the rapid fire, the remote fire lever is great if you push it up by the pivot point (less movement). my dad was with and it was so fast that he thought it slam fired 
I'll try to explain what I did to the wedge as best I can.
the round part of the wedge hits the back of the bolt head not allowing the 'wedge' portion to push the rollers out any farther. What I did was remove a little material from the front of the round part of the wedge so it would push the rollers out more but not so far that the rollers were jambed out as far as they will go (there is just a few thousands play at the end of the rollers travel). I truley ment to measure the round part before I cut it down but I forgot. I guess that I removed approx .060 to.070.
changing this helped out the primer situation but did not cure it. the big thing it did was make charging the gun 10 times smoother. I think that there is one less thing banging around when the charging handle is pulled, ie the rollers do not have as far to travel before they hit the wedge when it unlocks.
the ammo used was reloaded winchester brass, cci 200 primers, blc-2, 147g bullets.
the primers looked perfect with no signs of pressure and no failiers to cycle. the brass is way to soft because when the bolt pushes the round out of the belt it really dents the rim. Ill have to try some unfired military brass and see what happens, at least until I convert to 8mm or find some 7.62 that it likes.
sorry if this got long but there is a yugo underfolder kit in the basement that need the cosmoline cleaned off! does this gun building thing ever end
I'll try to explain what I did to the wedge as best I can.
the round part of the wedge hits the back of the bolt head not allowing the 'wedge' portion to push the rollers out any farther. What I did was remove a little material from the front of the round part of the wedge so it would push the rollers out more but not so far that the rollers were jambed out as far as they will go (there is just a few thousands play at the end of the rollers travel). I truley ment to measure the round part before I cut it down but I forgot. I guess that I removed approx .060 to.070.
changing this helped out the primer situation but did not cure it. the big thing it did was make charging the gun 10 times smoother. I think that there is one less thing banging around when the charging handle is pulled, ie the rollers do not have as far to travel before they hit the wedge when it unlocks.
the ammo used was reloaded winchester brass, cci 200 primers, blc-2, 147g bullets.
the primers looked perfect with no signs of pressure and no failiers to cycle. the brass is way to soft because when the bolt pushes the round out of the belt it really dents the rim. Ill have to try some unfired military brass and see what happens, at least until I convert to 8mm or find some 7.62 that it likes.
sorry if this got long but there is a yugo underfolder kit in the basement that need the cosmoline cleaned off! does this gun building thing ever end
-
Karbinator
-
Jason
.
the feeding works great.
the teething problems are with the ammo (just anal) it works good but I'm just not 120% happy with the primer trouble I was having. guess I just need to try some more kinds of ammo.
as far as bumping with the mount, I tried but cant get it done. If I hold the remote trigger at the point where it rotates you can fire so fast it almost seems like bump firing.
the teething problems are with the ammo (just anal) it works good but I'm just not 120% happy with the primer trouble I was having. guess I just need to try some more kinds of ammo.
as far as bumping with the mount, I tried but cant get it done. If I hold the remote trigger at the point where it rotates you can fire so fast it almost seems like bump firing.
-
Karbinator
-
Abwehr
Congratulations Jason! I really must admire you guys with all the work you put into making these guns fire again! I don't think I would attempt this project myself as my welding skills are poor! I will stick with my BRP SA. Thanks for the photo and it looks FANTASTIC; I know you are very proud of your accomplishment!