Well stayed after work again for another Hour or so and used my new tungstens and filler i got from AIRGAS friday. The tungsten is hell of a lot better than the piece that came with the welder , the filler is ER-70s and flows very nice and fills well.
I got the Shroud welded up where the camming piece was tacked and that is all welding and ground. The receiver needs to be welded in the corners and where the charging handle sits thats a tough little are to get copper in there. I started making a filler piece for the 1/2" or so that i need between the pirate cam ,and IMA rear. I made it from 1/8" flat stock and marked and bent corners to match the receiver i will then cut and grind till it is the right length. Looks like it will be great , ill get some pics up when i take pics at work today.
PS. I get a PPSH kit today haha