Semi Auto parts and services
- Pirate
- General
- Posts: 1212
- Joined: Mon Apr 25, 2005 2:32 pm
- Location: 1/2 mile from the beach in S Fla.
Semi Auto parts and services
I am offering the following parts and conversion services:
Grip kit type 1
2 side plates
1 hammer tube stop
1 trigger return retainer
2 front mount ears
1 front mount pin
2 hammer pins
2 trigger pins
1 trigger stop pin
Price: $40.00
Grip kit type 2:
Includes all the parts in the type 1 kit and all the FAL fcg parts with a modified hammer.
Price: $96.00
Grip stick conversion
Convert your gripstick and install the fal fcg. grip is blasted and finished with an
industrial black oxide coating
Price: $156.00
converted stripped grip stick $120.00
converted complete gripstick $176.00
Bolt kit:
Includes
1 bolt extension
1 drill bushing for the feed stud
2 strikers and springs
Price: $80.00
Bolt conversion
Convert your bolt to semi auto configuration, includes welding on the bolt extension and retracting stud, drilling the feed stud and wedge, and 2 strikers bolt is blasted and coated with an industrial black oxide finish.
If you need a spoon style ejector extension add $8.00
Price: $130.00
converted Bolt extension with 2 strikers and drilled wedge $155.00
Add $4.50 for shipping on the kits, return shipping for 1 bolt or grip is $4.50
Shipping for a bolt and grip is $5.50
Insurance, If you want insurance on the return use the table below for the amount to add.
Once I turn the package over to the US postal service I will no longer be responsible for it if you do not pay for insurance.
Fee . . . . . . . . Insurance Coverage
$1.35 ................ $0.01 to $50
$2.30 ................ $50.01 to $100
$3.35 ................ $100.01 to $200
$4.40 ................ $200.01 to $300
$5.45 ................ $300.01 to $400
$6.50 ................ $400.01 to $500
Grip kit type 1
2 side plates
1 hammer tube stop
1 trigger return retainer
2 front mount ears
1 front mount pin
2 hammer pins
2 trigger pins
1 trigger stop pin
Price: $40.00
Grip kit type 2:
Includes all the parts in the type 1 kit and all the FAL fcg parts with a modified hammer.
Price: $96.00
Grip stick conversion
Convert your gripstick and install the fal fcg. grip is blasted and finished with an
industrial black oxide coating
Price: $156.00
converted stripped grip stick $120.00
converted complete gripstick $176.00
Bolt kit:
Includes
1 bolt extension
1 drill bushing for the feed stud
2 strikers and springs
Price: $80.00
Bolt conversion
Convert your bolt to semi auto configuration, includes welding on the bolt extension and retracting stud, drilling the feed stud and wedge, and 2 strikers bolt is blasted and coated with an industrial black oxide finish.
If you need a spoon style ejector extension add $8.00
Price: $130.00
converted Bolt extension with 2 strikers and drilled wedge $155.00
Add $4.50 for shipping on the kits, return shipping for 1 bolt or grip is $4.50
Shipping for a bolt and grip is $5.50
Insurance, If you want insurance on the return use the table below for the amount to add.
Once I turn the package over to the US postal service I will no longer be responsible for it if you do not pay for insurance.
Fee . . . . . . . . Insurance Coverage
$1.35 ................ $0.01 to $50
$2.30 ................ $50.01 to $100
$3.35 ................ $100.01 to $200
$4.40 ................ $200.01 to $300
$5.45 ................ $300.01 to $400
$6.50 ................ $400.01 to $500
You do not have the required permissions to view the files attached to this post.
- Reichpapers
- Brigadegeneral
- Posts: 678
- Joined: Thu Mar 17, 2005 8:55 pm
- Location: Reading, PA
I just got my parts back from Pirate. These parts are so awesome. His craftsmanship and engineering of these parts are incredible. When I opened the box, I was not expecting such high quality for the price that I paid. His services and parts are well worth every penny. Save yourself the trouble and pain....send them to Pirate.
Thanks again man. If it wasn't for your help and patience, I wouldn't be as far along as I am now.
Sevo
Thanks again man. If it wasn't for your help and patience, I wouldn't be as far along as I am now.
Sevo
Chris
-
- Oberst
- Posts: 540
- Joined: Tue Mar 21, 2006 2:29 pm
- Location: Colorado
- Contact:
Should be, they are sufficiently modified. I think the MG42 doesn't even have enough parts anyways to make the list.Cpt_Kirks wrote:Pirate,
In case the rifle/firearm 922r ruling goes against us, are all the parts in your conversions US made?
If not, would it be possible to use all US made parts?
(1) Frames, receivers, receiver castings, forgings or stampings US
(2) Barrels IMPORT
(3) Barrel extensions NONE
(4) Mounting blocks (trunions) IMPORT/QUESTIONABLE
(5) Muzzle attachments IMPORT
(6) Bolts US (modded)
(7) Bolt carriers US (modded)
(8) Operating rods NONE
(9) Gas pistons NONE
(10) Trigger housings US (modded)
(11) Triggers IMPORT/US if pirate mods it
(12) Hammers US
(13) Sears NONE
(14) Disconnectors US
(15) Butt stocks IMPORT
(16) Pistol grips US
(17) Forearms, hand guards NONE
(18) Magazine bodies QUESTIONABLE IF A BELT COUNTS. Shouldn't since it is NOT a magazine. Have to look up the lawful def of magazine
(19) Magazine Followers NONE
(20) Magazine Floor plates NONE
Should be fine.
unless they look at it this waystriker754 wrote:Should be, they are sufficiently modified. I think the MG42 doesn't even have enough parts anyways to make the list.Cpt_Kirks wrote:Pirate,
In case the rifle/firearm 922r ruling goes against us, are all the parts in your conversions US made?
If not, would it be possible to use all US made parts?
(1) Frames, receivers, receiver castings, forgings or stampings US
(2) Barrels IMPORT
(3) Barrel extensions NONE
(4) Mounting blocks (trunions) IMPORT/QUESTIONABLE
(5) Muzzle attachments IMPORT
(6) Bolts US (modded)
(7) Bolt carriers US (modded)
(8) Operating rods NONE
(9) Gas pistons NONE
(10) Trigger housings US (modded)
(11) Triggers IMPORT/US if pirate mods it
(12) Hammers US
(13) Sears NONE
(14) Disconnectors US
(15) Butt stocks IMPORT
(16) Pistol grips US
(17) Forearms, hand guards NONE
(18) Magazine bodies QUESTIONABLE IF A BELT COUNTS. Shouldn't since it is NOT a magazine. Have to look up the lawful def of magazine
(19) Magazine Followers NONE
(20) Magazine Floor plates NONE
Should be fine.
(1) Frames, receivers, receiver castings, forgings or stampings US
(2) Barrels IMPORT
(3) Barrel extensions IMPORT well there is one call it the barrel ext or trunion (not the cam)
(4) Mounting blocks (trunions) IMPORT/QUESTIONABLE
(5) Muzzle attachments IMPORT
(6) Bolts US (modded)
(7) Bolt carriers US (modded)
(8) Operating rods IMPORT if a charging handle counts on a g3 then it would here also
(9) Gas pistons NONE
(10) Trigger housings US (modded)
(11) Triggers IMPORT unless it's a ar or us made fal
(12) Hammers IMPORT unless it's a ar or us made fal
(13) Sears NONE
(14) Disconnectors IMPORT unless it's a ar or us made fal
(15) Butt stocks IMPORT
(16) Pistol grips IMPORT unless you make or buy US parts
(17) Forearms, hand guards NONE
(18) Magazine bodies allmost positive it's NONE
(19) Magazine Followers NONE
(20) Magazine Floor plates NONE
now the real problem is that the same gun is ruled both a rifle and a firearm. as long as modified parts are considered US parts then all is good. if not then we have issues
- MauserMatt
- Stabshauptmann
- Posts: 274
- Joined: Mon Apr 25, 2005 8:24 pm
- Location: JAX area, Florida
- Contact:
-
- Oberst
- Posts: 540
- Joined: Tue Mar 21, 2006 2:29 pm
- Location: Colorado
- Contact: