Page 2 of 2
Re: Something Special we have been working on...
Posted: Tue Feb 20, 2018 7:45 am
by robertmcw
I would be interested. Can I send my bolt and my feed tray and nozzle to you so you can use my parts for the conversion and help keep the costs down? And would want a second barrel as well.
RM
Re: Something Special we have been working on...
Posted: Tue Feb 20, 2018 8:14 am
by Jaredrlewman
robertmcw wrote:I would be interested. Can I send my bolt and my feed tray and nozzle to you so you can use my parts for the conversion and help keep the costs down? And would want a second barrel as well.
RM
We are working with a couple vendors to get our rough costs for a better idea. Barrels will be chromed on the production runs, our prototype isn't but it is just a blaster for testing.
We are planning on doing a tiered option for the conversions. Allowing the customer to provide their feed tray, barrel extensions, etc. The standard nozzle and cone are not used in these conversions.
As soon as I get production going on the conversions I will begin R&D for the loaders, that will be a MUST for these conversions for sure..
Re: Something Special we have been working on...
Posted: Tue Mar 20, 2018 2:56 pm
by gagunguy
I'm interested in one