MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
RAILS CAN BE HELD IN PLACE WITH CLAY IT MAKES FOR EASY POSITIONING THEN SLIDING THE BOLT OVER IT INTO THE BARREL .WHEN IT MOVES SMOOTH AND FREE POKE A HOLE IN THE RAIL HOLES THEN USE A Q TIP WITH A MARKER INK ON IT TO MARK THE HOLE POSITION .
-------
RECIEVER HAS THE SCRIBES AND INDENTATIONS TO LOCATE THE AREAS .ALSO USE ONE OF THE OTHER HELPS FOR ACTUAL MEASUREMENTS BY SOMEONE ELSE.
2ND THE SHEET METAL RECIEVER NEEDS TO BE HEAT TREATED YOU COULD USE A FAN TIP AND A TORCH OR THROW IT INTO YOUR FIREPLACE THEN FOLLOW HEAT TREATMENT PROCEDURES.OR HAVE FASHION HEAVIER METAL
-------TRUNION ---ON THE FRONT RECIEVER THERE IS A NUB IN THE CENTER THE TRUNION FITS SNUG AGAINST IT. TO DO THAT YOU NEED TO REDUCE THE ROUNDED CORNERS BUT NOT ALL THE WAY LEAVE A 1/2 INCH . NOTICE THAT THE TRUNION DOES HAVE A SHAPE FOR IT. THIS WILL AID THE BARREL SIDE DOOR TO LOCK BETTER.
---------
THE CHARGING HANDLE FITS INTO THE SIDE HOLE ABOVE THE TRIGGER PUSHED FORAWRD___BUT FIRST ALLOW THE BOLT TO GO FORWARD--THE LONG ARM ON THE HANDLE GOES TOWARD THE BUTT THEN TURNED . THIS HOLD THE SPRING . NOW RETRACT THE BOLT UNTIL YOU HERE A CLICK. THE CHARGING JUST POSITIONS THE BOLD ON THE TRIGGER. THE RATCHET PLAT FITS BEHIND THE LITTLE CLAWS OF THE HANDLE LAYING FLAT ON THE RECIEVER (WELD IT)
-------
RECIEVER HAS THE SCRIBES AND INDENTATIONS TO LOCATE THE AREAS .ALSO USE ONE OF THE OTHER HELPS FOR ACTUAL MEASUREMENTS BY SOMEONE ELSE.
2ND THE SHEET METAL RECIEVER NEEDS TO BE HEAT TREATED YOU COULD USE A FAN TIP AND A TORCH OR THROW IT INTO YOUR FIREPLACE THEN FOLLOW HEAT TREATMENT PROCEDURES.OR HAVE FASHION HEAVIER METAL
-------TRUNION ---ON THE FRONT RECIEVER THERE IS A NUB IN THE CENTER THE TRUNION FITS SNUG AGAINST IT. TO DO THAT YOU NEED TO REDUCE THE ROUNDED CORNERS BUT NOT ALL THE WAY LEAVE A 1/2 INCH . NOTICE THAT THE TRUNION DOES HAVE A SHAPE FOR IT. THIS WILL AID THE BARREL SIDE DOOR TO LOCK BETTER.
---------
THE CHARGING HANDLE FITS INTO THE SIDE HOLE ABOVE THE TRIGGER PUSHED FORAWRD___BUT FIRST ALLOW THE BOLT TO GO FORWARD--THE LONG ARM ON THE HANDLE GOES TOWARD THE BUTT THEN TURNED . THIS HOLD THE SPRING . NOW RETRACT THE BOLT UNTIL YOU HERE A CLICK. THE CHARGING JUST POSITIONS THE BOLD ON THE TRIGGER. THE RATCHET PLAT FITS BEHIND THE LITTLE CLAWS OF THE HANDLE LAYING FLAT ON THE RECIEVER (WELD IT)
- drooling idiot
- General
- Posts: 1495
- Joined: Sat Mar 12, 2005 10:30 am
- Location: Philla ,PA
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
What ??? Really bad idea.heddar wrote: 2ND THE SHEET METAL RECIEVER NEEDS TO BE HEAT TREATED YOU COULD USE A FAN TIP AND A TORCH OR THROW IT INTO YOUR FIREPLACE THEN FOLLOW HEAT TREATMENT PROCEDURES.OR HAVE FASHION HEAVIER METAL
What are your posts supposed to be? random thoughts or a randomly scattered how-to?
There is NO trunnion on the 42.heddar wrote:-------TRUNION ---
"good , bad, .....I'm the man with the gun."
Its amazing anything works right around here with a bunch of
over-age juvenile delinquents running the place.
Its amazing anything works right around here with a bunch of
over-age juvenile delinquents running the place.
-
- Hauptmann
- Posts: 125
- Joined: Sat Sep 25, 2010 2:52 pm
- Anti-spam: Mg42
- Location: Wisconsin
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
Not sure what this is about. Are you answering a previous post or are these just random thoughts? WTF
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
I'll be damned if it doesn't look like one of those spam emails you receive. I'd not heat treat via the fire place nor does this receiver have markings. I don't see clay holding the rails either, maybe a photo of that would help.
Make sure this light is off:
Make sure this light is off:
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
We had a machinist here that wrote in caps,we thought he was yelling,but that was how he wrote for work. I tried to heat-treat my buttstock this way,never saw it again! ---bil PS-I am used to random thought posts...
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
If you look at heddars previous posts,this is a continuation from a build in September... ---bil
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
-
- Administrator
- Posts: 3251
- Joined: Fri Jan 11, 2008 6:03 pm
- Anti-spam: Mg42
- Location: Florida
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
I believe that a picture showed Dan Angola having the same problem with buttstocks, Bil. Yes, I remember the same person talking about his build, same way also.
Now an interesting question, what should we do with a person that posts thoughts and ideas etc, read the above posts and review:
Did we help them
Make them want to come back to this website
Or --- it's hammer time.....
Something to think about
Later 42rocker
Now an interesting question, what should we do with a person that posts thoughts and ideas etc, read the above posts and review:
Did we help them
Make them want to come back to this website
Or --- it's hammer time.....
Something to think about
Later 42rocker
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
I was thinking that myself. It did look like a spoof or something... I don't think the guys knew what to make of it. ---bil
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
- junglewalk
- Stabshauptmann
- Posts: 244
- Joined: Mon Jun 13, 2005 10:03 pm
- Location: by Ft.Knox, Ky. & KCR
- Contact:
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
I am so confused!........but I bet my lunatic mother-in-law could figure it out!
Beautiful women are like well built machineguns: Some should just be looked at, and left alone, while others were built to get hot.
-
- Stabshauptmann
- Posts: 181
- Joined: Sun Nov 25, 2007 12:09 am
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
WEIRD,i don't believe i'll ever go to Watertown, NY-- appears to be something in the water or the clay he's using has radioactive colbalt in it.
-
- Hauptgefreiter
- Posts: 12
- Joined: Wed Aug 26, 2009 5:44 pm
- Anti-spam: Mg42
- Location: Illinois
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
Maybe its the fumes giving off from throwing the reciever in the fireplace
-
- Administrator
- Posts: 3251
- Joined: Fri Jan 11, 2008 6:03 pm
- Anti-spam: Mg42
- Location: Florida
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
Well I guess it's hammer time. Something to think about to do to welcome the new guys and keep them around.
Later 42rocker
Later 42rocker
- drooling idiot
- General
- Posts: 1495
- Joined: Sat Mar 12, 2005 10:30 am
- Location: Philla ,PA
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
Not hammering on the FNG exactly, just trying to encourage complete sentences and trains of thought. If he has a message he is trying to communicate its not getting through to this audience.
I hope this forum is only intimidating to spammers, not new members. We offer a lot and don't ask too much in return, play nice together and try to be coherent when you post or at least tell us your drunk posting......
I hope this forum is only intimidating to spammers, not new members. We offer a lot and don't ask too much in return, play nice together and try to be coherent when you post or at least tell us your drunk posting......
"good , bad, .....I'm the man with the gun."
Its amazing anything works right around here with a bunch of
over-age juvenile delinquents running the place.
Its amazing anything works right around here with a bunch of
over-age juvenile delinquents running the place.
Re: MG42 RAILS/RECIEVER/TRUNION AND BARREL DOOR LATCH
Mine are usually when I am off my meds,don't drink.... ---bil
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert