Postby ChrisPCook » Wed Oct 11, 2006 10:09 pm
This is my first k/g 43 so as far as the trigger goes I'm not sure, as soon as it is the action is cycled it is completely normal.....
I need to take some more pix, if I can find my darn camera.....basically all I did was place another couple inches of wood onto the rear of the stock with glue and woodscrews....I had the outer dimensions slightly smaller, imagine if you will the back end of a K98 with the buttplate off, I will never have a fully original stock, but the dimensions were just slightly smaller than what the K98 buttplate is, so I am having a K98 buttplate cut in the middle(width wise) and then removing an inch or so of metal in the middle, then rewelding it and dressing it up to look good....that will go back on over the splice. Won't be perfect, but I'm sure that there are a lot of G/K43's that would benefit from that kind of treatment.....hope that made sense, new photos would be easier....Chris....