42rocker wrote:I'm sure that it will be worked on and WELCOME to the site.
42rocker wrote:There are lots of reviews on that cold receiver and most say it takes a lot of work to get it done and most don't finish it. Try Brian at brp
double check the amount of receiver that you have left on the barrel shroud after you get it and then check against brp's rear receiver half's to make sure it will work out. There are several brp built's on this site.
Also check for ima cut receivers on gunbroker.
Good Luck and enjoy the ride if possible.
Users browsing this forum: Blanksguy and 1 guest