Receiver Diagram Link

The #1 place for MG42 answers.
Post Reply
User avatar
salt6
General
General
Posts: 1262
Joined: Wed Jan 05, 2005 4:11 pm
Anti-spam: Mg42
Location: NE Okla
Contact:

Receiver Diagram Link

Post by salt6 »

Post this Receiver Diagram but will work on doing a cleaner copy.

http://mg42.us/web/mg42/print.jpg

Updated :wnana:
User avatar
salt6
General
General
Posts: 1262
Joined: Wed Jan 05, 2005 4:11 pm
Anti-spam: Mg42
Location: NE Okla
Contact:

Post by salt6 »

Cleaner print at

http://www.salt6.com/MG42/Reciever%20print.jpg

If anyone has this print, could you send a copy to me.
jstrohm
Leutnant
Leutnant
Posts: 95
Joined: Thu Apr 19, 2007 10:35 pm
Location: indianapolis

Post by jstrohm »

thanks e for the link
par0thead151

Re: Receiver Diagram Link

Post by par0thead151 »

anyone have a pictorial or review of what all needs to be done with the 80% receiver, or will all these measurements in the above photos need to be machined on a 80% half receiver?
alinbancroft

Re: Receiver Diagram Link

Post by alinbancroft »

Hello everyone,
Tried printing the above link. Can only get the first page. Anyone help me on this. or PM in a ttatchment?
Thanks.
Al
User avatar
salt6
General
General
Posts: 1262
Joined: Wed Jan 05, 2005 4:11 pm
Anti-spam: Mg42
Location: NE Okla
Contact:

Re: Receiver Diagram Link

Post by salt6 »

I'll get the files up this weekend. I dropped the old provider and still need to fix some things. :wnana:

salt
Through many dangers, toils and snares
I have already come;
'Tis Grace that brought me safe thus far
and Grace will lead me home.


John Newton (1725-1807)
____________________________________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."

George Orwell
____________________________________________
"I once was one of those men."

salt6
seprice40

Re: Receiver Diagram Link

Post by seprice40 »

salt6 wrote:I'll get the files up this weekend. I dropped the old provider and still need to fix some things. :wnana:

salt

Any luck on getting that link up again?
Thanks
42rocker
Administrator
Administrator
Posts: 3251
Joined: Fri Jan 11, 2008 6:03 pm
Anti-spam: Mg42
Location: Florida

Re: Receiver Diagram Link

Post by 42rocker »

I'm sure that it will be worked on and WELCOME to the site.

Later 42rocker
seprice40

Re: Receiver Diagram Link

Post by seprice40 »

42rocker wrote:I'm sure that it will be worked on and WELCOME to the site.

Later 42rocker
Thanks,

I just ordered my first M53 kit from centerfire and cant wait to start the build! Would you suggest the cold steel solutions industry lower for it?
42rocker
Administrator
Administrator
Posts: 3251
Joined: Fri Jan 11, 2008 6:03 pm
Anti-spam: Mg42
Location: Florida

Re: Receiver Diagram Link

Post by 42rocker »

There are lots of reviews on that cold receiver and most say it takes a lot of work to get it done and most don't finish it. Try Brian at brp
http://www.brpguns.com/
double check the amount of receiver that you have left on the barrel shroud after you get it and then check against brp's rear receiver half's to make sure it will work out. There are several brp built's on this site.
Also check for ima cut receivers on gunbroker.

Good Luck and enjoy the ride if possible.

Later 42rocker
seprice40

Re: Receiver Diagram Link

Post by seprice40 »

42rocker wrote:There are lots of reviews on that cold receiver and most say it takes a lot of work to get it done and most don't finish it. Try Brian at brp
http://www.brpguns.com/
double check the amount of receiver that you have left on the barrel shroud after you get it and then check against brp's rear receiver half's to make sure it will work out. There are several brp built's on this site.
Also check for ima cut receivers on gunbroker.

Good Luck and enjoy the ride if possible.

Later 42rocker
Thanks for the suggestion! And hope to dive into the build soon! :cross:
gunnut

Re: Receiver Diagram Link

Post by gunnut »

be nice to get the above links working again!
Grapeape
Hauptgefreiter
Hauptgefreiter
Posts: 13
Joined: Sun Aug 09, 2015 12:08 am
Anti-spam: Mg42

Re: Receiver Diagram Link

Post by Grapeape »

is there any way to get the links back up.
User avatar
salt6
General
General
Posts: 1262
Joined: Wed Jan 05, 2005 4:11 pm
Anti-spam: Mg42
Location: NE Okla
Contact:

Re: Receiver Diagram Link

Post by salt6 »

I'll look into getting it back.

salt
Through many dangers, toils and snares
I have already come;
'Tis Grace that brought me safe thus far
and Grace will lead me home.


John Newton (1725-1807)
____________________________________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."

George Orwell
____________________________________________
"I once was one of those men."

salt6
easymoney
Unteroffizier
Unteroffizier
Posts: 46
Joined: Sun Mar 20, 2016 8:44 pm
Anti-spam: Mg42

Re: Receiver Diagram Link

Post by easymoney »

Built one and tried it last Saturday. Worked great - no dented cartridges at all. However, somehow one side got pulled into the grove along side the trigger assembly and jammed the bolt. I would still give it 5 stars as I know it works. It may require a little tuning but well worth the effort.
easymoney
Unteroffizier
Unteroffizier
Posts: 46
Joined: Sun Mar 20, 2016 8:44 pm
Anti-spam: Mg42

Re: Receiver Diagram Link

Post by easymoney »

Has anyone ever thought of trying to thread a hole in the front of an old trigger group and attaching a piece of the rubber hose? I have had some less than good results with the homemade version of case dent preventer.
User avatar
NickD
Oberstabsgefreiter
Oberstabsgefreiter
Posts: 30
Joined: Fri Aug 11, 2017 2:38 pm
Anti-spam: Mg42

Re: Receiver Diagram Link

Post by NickD »

Hey guys,

Anyone have a diagram, or perhaps know what the distance is between the the front arm of the trunnion and where the 1st rivet goes? I have the BPR plans, and another one which I believe is a full auto, but it does not show the measurements there exactly. I want to know how much I need to remove from the receiver at that area. It is too long, but I needed a slightly longer receiver to work with where mine had been cut. Thank you in advance.
20171118_134413.jpg
Post Reply