help with locating the reciever dimples...

[sharmanajusmc]

I need the dimensions of the two dimples on either side of the feed tray area of the receiver, you know the ones on the sides that the spring on the feed tray locks into, I have looked at the basic dimensions sticky but while it shows the dimples themselves there are no measurements to help me locate them or how big they are and how deep they go... can anyone help me?

[anjongni]

Hi there, on my TNW receiver, the tray dimples extend from 2 1/4" to 3" from the face of the front of the receiver. that's 57.5mm to 75.5mm. They are located 9.0mm down from the surface of the flat top of receiver. Good luck! Phil