BRP updated site with more 34 kits for sale

[Panzerschreck]

BRP has partial MG34 kits starting at $435 listed on their site. Everything has good descriptions and pictures. These aren't cherry kits, but don't look too bad for the listed prices.

http://www.brpguns.com/mg34.htm

[www.Prussia.us]

Panzerschreck, GREAT heads-up for any guys that are thinking about doing one of these.

Prices have not been this low in years. Project guns can do the receivers/grip/bolt conversions and Brian at BRP is really helpful to deal with, so it is cheaper than ever to get a nice semi up and running

[CRUSADER]

I'd like to do a 34. Anybody have a line on a re-weldable receiver?

[Matt]

they are cheap but missing a lot of expensive parts.

[Bil]

Some of the 34 on the BRP site have just the front end of the receiver,a few have the cut receivers.You would then have to get filler pieces.As said above,most are missing the more expensive parts,but at these prices,if you add in the missing parts,the prices would be about right. ---bil

[www.Prussia.us]

Crusader, the best re-weldable receiver option (unless you do it yourself) is $500 at Project Guns, depending on the parts kit you buy, if it only has the front stub then pick up a rear section from IMA-USA for $125:
http://www.ima-usa.com/index.php/cPath/ ... 267d9c11a9

If you call it in and act real nice they can get you one with Eagles and swats, worked for me

If only small filler is needed Project Guns may be able to hook you up at no extra cost. Jorge and Stan are only a two man operation which is constantly swamped so the turn around time is not quick but WELL WORTH the wait. You will end up with semi receiver for about 1/3 the price of the TNW one, and no worries about filing/fitting which is not always the case with the TNW ones.

Another place to supplement needed ’34 parts is Sarco.

[FKpt.Fritz]

most of the ones listed are not complete! but good deals for collectors none the less.