Page 1 of 1
Which top cover is less common?
Posted: Tue Mar 06, 2018 5:41 pm
by Abominog
I haven't seen published a list of quantities manufactured by firm, so at this point I suspect the rarity of marked parts is based more on survival than number manufactured. With nothing published, it then falls to collectors who have the experience of observation of a long time.
So- please see attached photo of top covers. There are three- clc, bpr, and 963. Note the unpolished machining on the bpr (middle unit.) Are any of these more or less common/ valuable?
Thanks!
Re: Which top cover is less common?
Posted: Tue Mar 06, 2018 9:22 pm
by 42rocker
I think that feed back of this type would be great. I tried to start something on different maker marks a while back but it was shot down by a mod, who is not a mod anymore.
So it would be great to start going forth with getting data and info on this site.
On the top covers, I only own a few MG34 top covers so can't really help out on that.
Hope to see you at the Creek
Later 42rocker
Re: Which top cover is less common?
Posted: Thu Mar 08, 2018 9:56 am
by Abominog
42rocker wrote: I tried to start something on different maker marks a while back but it was shot down by a mod, who is not a mod anymore.
So it would be great to start going forth with getting data and info on this site.
r
That's stupid. Why would we not want to undertake a study of German MG codes and occurance? Right now it's all in the heads of 60+ year old long-time collectors.
bpr = Grossfuss, 1942-1943
clc = Rich. Herder
963 = unknown
I'll have to look at the Waffenampt to establish dates. The clc for example was used (reportedly) in 1940, 1941, and 1944. If that's the case, a 1940 or 1941 would probably be quite rare, since most of those went to the Eastern Front.
Of course, it's not unlikely that clc was used 1940 through 1944, and that the '42 and '43 manufacturing hasn't been confirmed.
More likely, clc made MG34 top covers in 1940 and 1941 (maybe '42) but after that everything went to "dot" so any 1944 clc MG34 parts would be spares.
When I look at the Waffenampt I'll get one data point. If we could record more, then the answer to the above would be more conclusive.
Re: Which top cover is less common?
Posted: Thu Mar 08, 2018 12:24 pm
by Abominog
Here's what I have so far. Note the manufacturer and inspectors (WaA) are not the same facility, even on the same piece!
Top cover, clc (Richard Herder), WaA519 (Eichorn 1941, 1942)
Top cover, bpr (Grossfuss) no WaA
Top cover, 963 (mfg code unidentified), WaA4 (DWM), WaA407
Bipods: keep in mind these were probably torn apart, replaced, etc. so unlikely parts match as came from factory.
Bipod 1, DCJ (unknown), WaA710
Bipod 2, ?ec40 (unknown), WaA727 (K. Barth, 1940, 1941), WaA815 (SDP, 1941, 1942)
Bipod 3, dfb (Gustloff), ?14, WaA766, Dia (all unknown; "Dia" is in script, very unusual)
Garand collectors love to assemble a factory-correct rifle. Good luck with the MG34.