Vorsatzfernrohr mounted on a MGz 40
-
- Oberfeldwebel
- Posts: 84
- Joined: Sat Mar 22, 2014 4:42 pm
- Anti-spam: Mg42
Vorsatzfernrohr mounted on a MGz 40
Vorsatzfernrohr in box and then mounted on scope.
-
- Administrator
- Posts: 3251
- Joined: Fri Jan 11, 2008 6:03 pm
- Anti-spam: Mg42
- Location: Florida
Re: Vorsatzfernrohr mounted on a MGz 40
Wish that it was mine!
Looks Great.
Later 42rocker
Looks Great.
Later 42rocker
-
- Oberfeldwebel
- Posts: 84
- Joined: Sat Mar 22, 2014 4:42 pm
- Anti-spam: Mg42
Re: Vorsatzfernrohr mounted on a MGz 40
Hi,
One thing I have noticed which I don't quite understand is this. The rubber eyepiece eye protector isn't interchangeable, the one with the scope only fits the scope and doesn't fit the periscope or correction it will, be it stretches so much that it won't fit back again once it has been stretched. The two sizes are different and so you would need two rubber eyepieces. See below for the difference in sizes. I suppose you just carry two in the box? Tim
One thing I have noticed which I don't quite understand is this. The rubber eyepiece eye protector isn't interchangeable, the one with the scope only fits the scope and doesn't fit the periscope or correction it will, be it stretches so much that it won't fit back again once it has been stretched. The two sizes are different and so you would need two rubber eyepieces. See below for the difference in sizes. I suppose you just carry two in the box? Tim
-
- Oberfeldwebel
- Posts: 84
- Joined: Sat Mar 22, 2014 4:42 pm
- Anti-spam: Mg42
Re: Vorsatzfernrohr mounted on a MGz 40
....and from that a thought just struck me out of the blue, suppose you do carry two. Where would it go, if you have it on the periscope it supports the end and holds it firm against the box and stops any movement. I have just tried this as an experiment. Is this logical? Tim
Re: Vorsatzfernrohr mounted on a MGz 40
Hi Tim,
The periscope was made for the MGZ/MGz34 and the reason for the larger end for the rubber eye-protector.
These were used with the MGz40 optics with the addition of the small "adaptor" (usually made from a fired/cut-down piece of aluminum cartridge-case from a flare-pistol.......which is what I believe I am seeing in one of your photos.
When used with the MGZ/MGz34, the MGZ/MGz34 rubber eye-protector would just be removed and placed onto the periscope.
When used with the MGz40, the MGz40 rubber eye-protector would be removed from the MGz40 optic and placed into the carry-can. The Gunner would then just not put his eye as close to the periscope opening.
Regards, RichardS
US Army, Retired.
The periscope was made for the MGZ/MGz34 and the reason for the larger end for the rubber eye-protector.
These were used with the MGz40 optics with the addition of the small "adaptor" (usually made from a fired/cut-down piece of aluminum cartridge-case from a flare-pistol.......which is what I believe I am seeing in one of your photos.
When used with the MGZ/MGz34, the MGZ/MGz34 rubber eye-protector would just be removed and placed onto the periscope.
When used with the MGz40, the MGz40 rubber eye-protector would be removed from the MGz40 optic and placed into the carry-can. The Gunner would then just not put his eye as close to the periscope opening.
Regards, RichardS
US Army, Retired.
-
- Administrator
- Posts: 3251
- Joined: Fri Jan 11, 2008 6:03 pm
- Anti-spam: Mg42
- Location: Florida
Re: Vorsatzfernrohr mounted on a MGz 40
Well learned some more stuff tonight. Thanks..
Really does look great.
Later 42rocker
Really does look great.
Later 42rocker