WTS: MG42/SA42/M53 2-pcs. Blank-Barrel-Assemblies.

[Blanksguy]

WTS: 2-pcs. Blank-Barrel-Assemblies for the MG42/SA42/M53 as the photos show below.
I currently have five-sets of 2-pcs. Blank-Barrel-Assemblies newly made in either 7.62x51mm/.308 cal....or in 8x57mm. You can order either or both as a "fitted-set".

The 2-pcs. Blank-Barrel-Assembly operates using less pressure-requirement due to only having to move the weight of the shorter barrel-extension w/piston (not the weight of an entire live barrel-assembly)..........this allows the user to remove the Muzzle-Cup/"Nozzle" and have more noise out the front of their MG42/SA42/M53 weapon-system. Just what you need when trying to use those "surplus" (cheaper) .308 Blanks being sold out on the market now.

These are correctly made with the "flair" at the rear of the front-barrel-section.....this keeps the front barrel-section from moving forward when firing "Blanks". (IE: If this was allowed to move forward, it would allow the barrel-section to "hammer" on the barrel-bearing and either shear-off the barrel-bear's "keys" or ruin the welded-in front barrel-support "key-ways".).
All muzzles are threaded for "cup-point-allen-set-screws" so that you can change the restriction-size to operate with different pressure "Blanks".

Current prices have been lowered to:
1: MG42/SA42/M53 2-pcs. Blank-Barrel-Assembly in either 7.62x51mm/.308 cal. or in 8x57mm for $285 shipped to your street-address (lower-48 only).
2: MG42/SA42/M53 2-pcs. Blank-Barrel-Assembly as a fitted-set with both calibers (7.62x51mm/.308 and 8x57mm) at $395 shipped to your street-address (lower-48 only).

Payment by Money-Order or Check only.
Contact me at my below listed e-mail address for ordering instructions.
Regards, RichardS in MI.
US Army, Retired
Blanksguy2001@chartermi.net

[zb-30]

I'll take one of these in 7.62x51mm/.308 cal:

1: MG42/SA42/M53 2-pcs. Blank-Barrel-Assembly in either 7.62x51mm/.308 cal. or in 8x57mm for $285 shipped to your street-address (lower-48 only).


Email inbound

[Blanksguy]

42rocker just brought to my attention that MG42/MG3 Barrel_prices have recently gone up, so now I have to raise the prices for 2-pcs. Blank-Barrel-Assemblies for reenactors to:

1: 2-pcs. Blank-Barrel-Assembly in either 8x57mm or 7.62x51mm/.308 cal. = $375 shipped to your street-address (lower-48 only).
2: 2-pcs. Blank-Barrel-Assembly in both 8x57mm and 7.62x51mm/.308 cal. = $485 shipped to your street-address (lower-48 only).

Under the old prices, I would not have been able to replace the barrels that are required to be used (2) for each 2-pcs. Blank-Barrel-Assembly for what I was selling them for.

Regards, RichardS in MI.
US Army, Retired
Blanksguy2001@chartermi.net

[Bil]

Richard-would you like me to fix the prices in your ad up top? ---bil