MG3/MG42 Mount

Saved for Reference.
Post Reply
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

MG3/MG42 Mount

Post by JBaum »

I surprised myself a little with finding these..... I've managed to buy 4 more MG3 mounts, like I had for sale before. They're on the way from German and should be in by Aug. 1. If anyone wants one, let me know.

I'm sure the guys who already have one can tell you what a great piece of hardware this is.

MG42/MG3 Mount - This mount is quite a piece of hardware. It is German manufactured for the vehicle ring mount and is made of very heavy steel. It has a recoil absorbing double spring mechanism built into it, which twists to allow the gun to be level side-to-side while in the mount. It also has a hinged yoke for up and down, and the large swivel pin on the bottom allows traversing. The swivel pin on the bottom has a diameter of 0.87" or about 7/8", and is 2-15/16" long). The curved part on the left in the last picture is a shell deflector that aligns under the ejection port when the gun is mounted. It has a lever on the bottom to allow the gun to be securely mounted - press the lever to install the gun, release it to hold the gun in place. Paint is olive drab, weight is 8 lbs, overall length is about 15". This is original German army military surplus. There's even a grease fitting on the bottom for lubricating the recoil absorber. This will fit in the bigger priority mail flat rate box.

That's a piece of tape on the shaft for protection during shipping.

$150 + $10 priority mail postage for US addresses.
Attachments
mount4.JPG
mount3.JPG
mount2.JPG
mount.jpg
Last edited by JBaum on Fri Jul 27, 2007 1:50 am, edited 1 time in total.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
MGMike
Stabshauptmann
Stabshauptmann
Posts: 194
Joined: Tue Oct 03, 2006 2:31 pm
Location: Hot Springs, SD

Re: MG3/MG42 Mount

Post by MGMike »

Boys:

This is a fine mount, it clips right where the back bipod mount is....if you haven't got a ring for it, make a pedestal and bolt it to the floor of your convertable...Bil? :lol: That's what I'm figuring on doing to the VW Thing that I haven't got yet 8)

MikeD
Bil
Field Marshal
Field Marshal
Posts: 4873
Joined: Sun Nov 26, 2006 10:21 pm
Location: Brookline,VT

Re: MG3/MG42 Mount

Post by Bil »

Mike is right-these are real neat.I mounted it on the windshield header,where the rear view morror was.Never look back-those flashing light are still there! :? I was surprised to see that John had gotten more of these-I was hoping they would skyrocket in value,and I could send my grandson to college. These are a good item,with a lot of uses. :lol: ---bil
"I dream of a world where I can buy alcohol,tobacco and firearms from the same drive-up window,and use them all on the way home from work!" Dogbert
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

One gone, three left.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

Two gone, two left for sale.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

Three gone, one left.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

I'll have to say I've amazed myself with this deal..... I was complaining to another guy in Germany that the guys here really liked these mounts, but I couldn't find them.... He and I have made a deal to say the least. The guy has a stack of them, and he said he'd sell them to me as long as he still had some. I have 4 more on the way. I'm going to get them 4 at a time for as long as I can sell them and he still has some. If he runs out, or nobody wants any, that'll be the end of it. I'm not going to wrap up a few thousand bucks just to have a bunch of them sitting here with nobody to sell them to.

SO,,,,,, if anyone wants one or more, now's the time.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
User avatar
drooling idiot
General
General
Posts: 1495
Joined: Sat Mar 12, 2005 10:30 am
Location: Philla ,PA

Re: MG3/MG42 Mount

Post by drooling idiot »

count me in for one when ever you have it.
"good , bad, .....I'm the man with the gun."

Its amazing anything works right around here with a bunch of
over-age juvenile delinquents running the place.
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

OK DI.... I'll let you know when the second batch arrives. It should be in about 10 days.

That leaves two still coming without a home.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
smokinggun

Re: MG3/MG42 Mount

Post by smokinggun »

I'll take one jbaum if there are any left. Pm me with the payment info. Thanks
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

smokinggun wrote:I'll take one jbaum if there are any left. Pm me with the payment info. Thanks

Will do as soon as I get them. They're on the way from Germany. The first 4 are of course already spoken for, but the second batch should arrive about 5 days after the first batch, so I figure around the end of the first week of August.

That leaves one left out of the last batch I have ordered.

Thanks,
John@German<remove this>Manuals.com

http://www.GermanManuals.com
MikeInMn
Gefreiter
Gefreiter
Posts: 16
Joined: Wed Dec 07, 2005 11:26 pm

Re: MG3/MG42 Mount

Post by MikeInMn »

I'll take the last one if still available.
PM sent also
Mike
User avatar
Sevo
Stabshauptmann
Stabshauptmann
Posts: 172
Joined: Fri Mar 03, 2006 5:20 pm
Location: usa

Re: MG3/MG42 Mount

Post by Sevo »

Count me in for one as well. please pm me when they come in with the payment details... great find
Chris
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

Here's a non-update on the mounts: They've been shipped, but I haven't seen any of them yet. :(

I'm hopeful they'll arrive soon, but all I know is that they're on the way.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

Well, I was starting to worry they wouldn't come in, but the first box with 4 mounts for the MG3 came in this morning.

The first 4 buyers have been sent messages.

Drooling Idiot is in slot number 5
Smoking Gun is in slot number 6
MikeinMN is in slot number 7
and Sevo is in slot number 8

The second box of 4 was supposed to be sent out a few days after the first box, so I'm guessing the second box will arrive within the next 5 days (considering the weekend).

Messages will go out as soon as they're here. Glad I didn't hold my breath waiting for them.

Thanks,
John@German<remove this>Manuals.com

http://www.GermanManuals.com
smokinggun

Re: MG3/MG42 Mount

Post by smokinggun »

Thanks jbaum, let me know when they come in.
User avatar
JBaum
Administrator
Administrator
Posts: 3123
Joined: Sat Mar 12, 2005 8:41 pm
Anti-spam: Mg42
Location: NE Ohio
Contact:

Re: MG3/MG42 Mount

Post by JBaum »

good news/bad news... the second box of four mounts came in today, beat up and missing one mount that likely went out through the hole in the end of the box. I had miscounted the order numbers since one person eventually said they wanted one under their username here and their email address to me. I didn't put it together that it was the same person till after the first batch of 4 came in. So, we're on numbers 6-8 with these three mounts.

To try to be fair, I'm going with one per person, and if I manage to get another box of them (I'm trying), I'll fill that last request for a second mount, and maybe have one or two left over to sell.
John@German<remove this>Manuals.com

http://www.GermanManuals.com
Post Reply