Guns: Hakim, k98, 9mm ar15, 8mm 1919 Kits: sten, suomi, b

[striker754]

I am getting rid of a bunch of guns and parts kits to finance a fun car project. All prices plus shipping. No trades please unless you have some LS1 parts.

Hakim 8mm Egyptian Semi Auto Rifle - $550
I have never shot this; I simply just haven't had time too. It should shoot great. The upper handguard has a couple cracks in it, I'm sure that's not an expensive fix. Again, just haven't had time to mess with the gun. The fun part: This gun has a 25 round magazine. It will also come with the stock 10 rounder. The magazine may need slight feedlip tweaking but should function great.

Pics: http://www.theflyingbullet.com/hakim/


K98 - $225
The rifle is RC, manufacture code is dot. All Nazi markings are intact. Electropencil.

Pics: http://www.theflyingbullet.com/k98/


9mm AR15 - $840
This is a 8mm AR15. Olympic upper with free floating handguard. Has a rail block at the end of it to attach stuff to. Double Star Lower, RRA parts kit. Best part is it has a mag block to accept regular Sten mags. Comes with the red dot which is a high quality aimpoint clone. Has the best ww2 sten mag loader and 3 sten mags.

Pics: http://www.theflyingbullet.com/ar/


Sten Parts Kit - $140
This is a MK3 sten kit. I have cleaned all the parts off. I have removed all parts of the old receiver and have saved the tabs on the side...talk about work! I have 5 mags that come with this. Barrel is extended. Also has a loop stock which I think looks cool. AR FCG and firing pins pictured are not included, neither is the ammo in one of the mags.

Pics: http://www.theflyingbullet.com/sten


Suomi Parts Kit - $300 CO ONLY unless you want me to cut the receiver
This is a Suomi parts kit. It has one 71 round drum. The barrel has been extended to legal length by Tommerr. It looks great. I have also used his jig to fit the barrel to the receiver for the ATF approved legal takedown. Lots of file fitting. This also has a semi auto receiver from Prexis. The stock has some slight cracking by the tang but what can you expect from something this old. I have done all the machining on the receiver. It is my opinion that this is now a firearm, and probably ATF's opinion as well. As the manufacturer, I do not want to mark my information on the weapon for various reasons, which I would have to do to transfer the gun interstate. Therefore, I will only sell this to a Colorado resident in Colorado. I can ship it to you in CO or we can meet face to face.

Pics: http://www.theflyingbullet.com/suomikit


Bren MKII Kit - $750 CO ONLY unless you want me to cut the receiver
This is a Bren MKII kit with 2 barrels. The kit has all of the semi auto machining done. This takes expensive carbide tooling to do, but it is already done! I used one of jumerra's (sp?) jigs to weld the receiver together. It has the semi auto blocking bar and other required mods for semi auto. The receiver is just rough welded. Again, I just haven't had time to finish welding it and clean it all up. Hard work is done. The Bren also has 2 7.62x54r magazines and an extra barrel that you can use to convert to the cheap x54r cartridge. All that needs to be done is have one of the barrels reamed to a 54r chamber and open the bolt face slightly on a mill.

Pics: http://www.theflyingbullet.com/bren


1919A4
I may sell my 8mm 1919 as well if anyone is interested in it. I made a thing for it to sit on an mg42 tripod and hold 2 ammo cans. Also have 2000 links. CO only here again.


All guns go to FFLs unless you are in CO. I prefer money order or paypal through a bank account. My account can take 5 credit card payments a year but they charge me a 5% fee for that service. If you pick that up you are welcome to use paypal with a CC. Reasonable offers considered.