How to Blank adapt a PM 1910 Maxim?

Just about anything goes but no MG42 or MG34 talk.
Post Reply
Franz20
Stabshauptmann
Stabshauptmann
Posts: 192
Joined: Sat Jun 05, 2010 11:36 pm
Anti-spam: Mg42

How to Blank adapt a PM 1910 Maxim?

Post by Franz20 »

How does one Blank adapt a 1910 maxim? What are the best blanks to use?

Frank
amafrank
Major
Major
Posts: 367
Joined: Mon May 12, 2008 6:51 pm
Location: USA

Re: How to Blank adapt a PM 1910 Maxim?

Post by amafrank »

the easiest way is to buy a blank adapter made for the gun. The Finns made them up and apparently used them. Northridge had some at Knob Creek a few years back. You might check their website along with numrich and sarco. If you can't find one it is possible to make a new orifice for your standard booster that will restrict the gas flow enough to operate the gun.
As for blanks you'll just have to see whats out there. Most machinegunners don't shoot blanks so we don't know who has what and which work best. I have never seen wood or plastic bullet blanks for the 54R and this means you'll likely have to come up with some sort of adapter for the feedblock to keep the blanks in the correct position while feeding and exclude live ammo. There have been many different types of military blanks imported so something should work.

Frank
Post Reply