Page 1 of 3
MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:25 am
by oakrodent
I decided show a step by step build of one of my BRP receiver. I have built a few of these and this is how I do them. I am not saying it is the only way, but it’s the way I do them and they all have worked without a flaw. I also don’t use rivets. I have used them my whole life. From using them on a large farm in the Midwest when I was going up to aircraft in the military to gas turbines in the power industry. Rivets are hard to do correctly. I have done millions of them. Even if you get them tight, sometimes they become loose. This is a flaw I am not happy with. I weld everything. When my MG42’s are done they have all the correct rivet heads in all the correct places, inside and out and it is quite easy to do. I will show every step for you first time builders. I will have this one completed in under a month. I measure everything in millimeters. All my tools are standard.
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:30 am
by oakrodent
Steps 5 - 8
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:33 am
by oakrodent
Steps 9 - 12
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:36 am
by oakrodent
Steps 13 - 16
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:39 am
by oakrodent
Steps 17 - 21
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:43 am
by oakrodent
Steps 22 - 27
Re: MG-42 BRP Build
Posted: Sat Nov 07, 2009 9:48 am
by oakrodent
Steps 28 - 33
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 5:23 pm
by oakrodent
Steps 34 -35
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 5:57 pm
by oakrodent
Steps 36 - 40
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 6:09 pm
by oakrodent
Steps 41 - 45
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:05 pm
by oakrodent
steps 46 - 51
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:10 pm
by oakrodent
Steps 52 and 53
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:15 pm
by oakrodent
Steps 54 - 58
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:20 pm
by oakrodent
Steps 59 - 64
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:28 pm
by oakrodent
Steps 65 - 68
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:33 pm
by oakrodent
Steps 69 - 73
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:56 pm
by oakrodent
Steps 74 and 75
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 7:59 pm
by oakrodent
Steps 76 - 79
Re: MG-42 BRP Build
Posted: Wed Dec 09, 2009 8:09 pm
by oakrodent
Steps 80 - 84
Re: MG-42 BRP Build
Posted: Thu Dec 10, 2009 6:02 pm
by oakrodent
Steps 85 - 89