there is machine work required, I am working on a set of templates you can download for some of it. I will be getting a shroud from Wise lite and some information on mating the parts. I will post it all in the tutorial.
I will also be doing one for the bbl shroud bushing.
I have attached a copy of the ejection port template, can a few of you download and print it and see if it comes out to scale?
I agree-I couldn,t get it to come out,but I am not too proficient with the computer.So I just used the measurements,added a radius,and made a paper template.Tried it on several receivers-worked fine!. ---bil
To print to size on everybody's printers, it needs to be a .pdf file. If your drafting program will "output" .pdf's then you can do it. If not....I can have a try with my program. Send me a .dxf or .dwg file and I'll see what I can do.
I just updated the cam section page on my site, I can't attach the dfx file format here. There is a ling to the reader and a link to the drawing, click on the link, save the fie, download the virewere and it should print to scale. I will have the rest of the templates posted in a couple of days if it works.
The views and comments posted in these forums are personal and do not necessarily represent the those of the Management of MG42.US.
The Management of MG42.US does not, under any circumstances, accept any responsibility for any advice or recommendations, made by, or implied by, any member or guest of MG42.US that results in any loss, in any manner to a member, or to any other person.
Furthermore, the Management of MG42.US is not responsible for the content of any other Internet site(s) that have been linked to from MG42.US.