Newbie with a mg53 kit from apex

Ask your build questions here. Welding, assembly, etc.
Post Reply
Razman
Friendly New Guy
Friendly New Guy
Posts: 2
Joined: Tue Jun 23, 2015 7:50 pm
Anti-spam: Mg42

Newbie with a mg53 kit from apex

Post by Razman »

As the title says....
I am new to this gun and your group.
I have read mech warriors thread at weaponer.
And this build seams to be within my grasp.
I just hope I can keep it in my budget :lol:

So,where should I start?
I want to go 308 I think.I have a fal I just built from a 90 percent receiver.
And I try to keep similar calibers on my builds.
I just contacted royal tiger to see if they still have the 308 conversion kits for 199$
I doubt I will be that lucky,but ya never know,right?
So what are my best and cheapest sources for my rear receiver?
And what else should I anticipate having to buy?And from where?
Thanks for any advice you can give me.
Ken
usmc8488
Leutnant
Leutnant
Posts: 85
Joined: Tue Apr 30, 2013 10:36 am
Anti-spam: Mg42
Location: San Diego

Re: Newbie with a mg53 kit from apex

Post by usmc8488 »

If you want cheep then buy a complete gun.... Personally I found in the 30+ years on building firearms in my garage is that building is more expensive. Building, for me is a hobby, hobbies cost money.

I enjoy building and get great satisfaction in completing and tinkering on builds to get them to run rite. The Mg42/53 for me was one of the hardest builds I have ever done. I have only basic tools, ie welder, dremel, drill press and hand tools.

Before you start your build, as a citizen, Make sure you review Federal requirements 922r and if you live in a restrictive state like I do (California requirements)

That being said, DO THIS BUILD. The end is worth it. Ask questions.
jcmg42
Oberfeldwebel
Oberfeldwebel
Posts: 71
Joined: Thu Dec 30, 2010 10:29 pm
Anti-spam: Mg42

Re: Newbie with a mg53 kit from apex

Post by jcmg42 »

Grapeape
Hauptgefreiter
Hauptgefreiter
Posts: 13
Joined: Sun Aug 09, 2015 12:08 am
Anti-spam: Mg42

Re: Newbie with a mg53 kit from apex

Post by Grapeape »

Brpguns said that they should have complete semi bolts back in stock by mid September. Maybe something to get sooner then later. I just got my kit and trying to get all my parts for semi before I even start building her. I learned my lesson with my sterling build, no bolt parts. Big sad face.
along
Feldwebel
Feldwebel
Posts: 64
Joined: Sun Dec 06, 2015 6:41 pm
Anti-spam: Mg42

Re: Newbie with a mg53 kit from apex

Post by along »

apex has semi-auto bolts, with the cocking handle and bolt extension (brp parts) welded on already for $50.

I'm just starting my build, but it seemed useful to get
amafrank
Major
Major
Posts: 367
Joined: Mon May 12, 2008 6:51 pm
Location: USA

Re: Newbie with a mg53 kit from apex

Post by amafrank »

You might have more luck finding bits and pieces as well as info if you look for the right model. The MG53 is a Colt commercial variation of the 50 BMG M2. The yugoslavian copy of the MG42 is an M53. Even though a lot of guys can't tell the difference you'll find more with the right model than you do with the wrong one.....
just a hint.

Frank
along
Feldwebel
Feldwebel
Posts: 64
Joined: Sun Dec 06, 2015 6:41 pm
Anti-spam: Mg42

Re: Newbie with a mg53 kit from apex

Post by along »

razman do you have the mg53 or m53?
Post Reply