Panaceabeachbum grip stick photo?

[cz2]

Any one running one of the Thompson machine grip sticks?I would like to see a shot of the front mounting system/tab installed.
thanks,cz2.

[drooling idiot]

http://www.panzer46.net/mg42board/viewt ... =39&t=4330

[jstrohm]

those are nice pics butt how about some pics as to how the thompson machine gripstick mounts on the frt. i am not trying to be difficult but i did not see one pic as to how it mounts. any body else have something different to show that might be helpful?

[drooling idiot]

A picture of the same style Gripstick made by panaceabeachbum. picture by Tomcatshaas

thompson machine is panaceabeachbum , look for the ones with the red background.

[tomcatshaas]

tadaaaa

TC

[jstrohm]

thanks, that is more helpful

[tomcatshaas]

you are welcome!

let me know if you need more angle shots.

The panaceabeachbum really is the way to go. Works great. Excellent quality. Outstanding service before, during and after the
fact. Only one problem with the 42 grip, that it doesnt come with a safety, or the AR safety hole located and drilled, so without this AR safety, you will get trigger slap because there is nothing to stop the trigger from being pulled too far aft. I just had pbb drill this hole, and I installed a modified 3/8" close tol. dowel pin and a temp. set screw to keep it in place until I devise the push/pull safety.

TC

[jstrohm]

some more angle shots would be nice and maybe some pics of the safety you installed i would like to see that, i am thinking of trying to do that as well.

[cz2]

TC, Thanks,made my decision.The grip locates/locks on the rear of unaltered ejection port,correct?
cz2

[tomcatshaas]

TC, Thanks,made my decision.The grip locates/locks on the rear of unaltered ejection port,correct?
cz2

correct. It hooks/attaches there with an adjustable hook which locks down with a set screw. You loose the function of the ejection port door....but who cares?

TC

[tomcatshaas]

dowel pin installed. The set screw is 4-40 if I can remember. Later on the hole will house a small check ball with a sping and a set screw plug to adjust tension. I haven't sat down and designed the push/pull safety yet.

TC

[Bil]

Very nice-thank you.There are also pics on his web site,google'thompson machine'[I don't know how to do links] ---bil

[tomcatshaas]

Very nice-thank you.There are also pics on his web site,google'thompson machine'[I don't know how to do links] ---bil

Bil, Just cut and paste....you can add that to your crayon skills.

http://www.thompsonmachine.net/42grip.htm

[gordie k]

you must limit trigger travel to apox. .100 over travel to stop trigger slap, then bob the hammer for cl.

[jstrohm]

gordie can you explain a little better what you are talking about. i don't know anything about it.