www.MG42.us

Make sure you have a 8MM can not 7.62x51. 7.62x51 loader comes in 8MM can. There are other threads on this site with description and good pic of positions of pieces!! bjrmg

Sold by 07 SOT to a 07 SOT! Tube was a 2 cut and welded at front jacket.Jig did not go with it!! JR

The bidder who ran it up to 6 grand was out bid by measly 25 dollars at the end. Just sayin 6 thou and you cant afford another couple hundred? Thanks. JR

Want to buy MG3 mount W/WO scope! Reasonably priced please. Otherwise complete and functional. bjrmg

It seems that if the "lugs" on the barrel bushing are bottoming out in the guide channels and the barrel is engaging, hitting the barrel stop squarely; then the shroud dimensions should be checked from barrel stop face to end of the "nozzle" for proper length. Just a thought! JR

The original manufacturer of the jig was Critical Dimensions. I did contact someone there. Said they were sold out for over a year and showed no interest in making more! Thanks bjrmg

Anyone having one of these, and not wanting to sell or rent, can you provide dimensions of the blocks W-H-L and rod? Also anyone having a workable alternative please advise!Thanks bjrmg

P/S Thanks for the pics Richard!

I need a rail alignment fixture-jig. They were offered forsale about 2-3 years ago! Thanks. bjrmg

8MM Romo, Yugo, and even Turk has all been either shot up, or bought up. Shooters, speculators, hoarders and gougers have accounted for depleating almost all existing stocks. Will there be a re-supply of this "obsolete" caliber? No one knows yet! One thing for sure; it will never be "cheap" again. M...

Usually 300 rnds. 200 with starter tab, bullets forward then 100 w/tab, laid in opposit direction bullets to rear. This compensated for the angle drop of top belt to ease feeding. Then turn can around. Hope this helps. JR Houston Texas

How to disassemble and reassemble a recuperator for MG42. A picture or illustration will be greatly appreciated. Thanks. JR

How do I contact you? bjrmg