Search found 7 matches

Go to advanced search

by deminn
Thu Sep 21, 2017 4:28 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

Re: TNW SA MG34 Failure to feed

Problem solved. Getting everything ready and checked over once more for a preliminary tech call to TNW I found my barrel cone nut unscrewed three clicks too loose. That's all it took to re-align the chamber and now I believe it should be perfect. I should have double checked this before, but I guess...
by deminn
Sun Sep 10, 2017 2:02 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

Re: TNW SA MG34 Failure to feed

Tired switching out both tray and top cover. Exact same hang up result occurred. I had crafted a thin piece or copper to fit in-between the rear receiver face and the front face of the loading tray to reduce the height and diameter of the opening on the front of the feed tray, hoping to direct the c...
by deminn
Thu Sep 07, 2017 5:56 pm
Forum: Wanted
Topic: WTB MG34 feed tray
Replies: 14
Views: 2542

Re: WTB MG34 feed tray

If you do find a supply, I'd appreciate hearing of it. Thanks.
by deminn
Sun Aug 27, 2017 9:49 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

Re: TNW SA MG34 Failure to feed

The OP knows exactly how to load the SA MG34 initially and does it exactly as you describe other than the spacer nonsense. It' s worked regularly in his other SA 34, just not this one. This one seems to have a issue with the loading tray aperture, receiver edge, or top barrel locking piece not direc...
by deminn
Sat Aug 12, 2017 10:32 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

Re: TNW SA MG34 Failure to feed

Thanks. I'll give it a shot.
by deminn
Sat Aug 12, 2017 6:34 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

Re: TNW SA MG34 Failure to feed

My apologies for imprecise word selection. First, extractor is on the bottom of the bolt so I was referring to the piece on the other side of the bolt head. Second, I get it, no offense taken. I do have another one of these which runs fine and I do understand how they operate. So I pull the bolt rea...
by deminn
Sat Aug 12, 2017 1:49 pm
Forum: MG34 General Discussion
Topic: TNW SA MG34 Failure to feed
Replies: 12
Views: 2829

TNW SA MG34 Failure to feed

New to the board, checked out the stickies and relevant posts from the past but still not able to diagnose problem. A year or more back I bought a used TNW SA MG34 on Gunbroker. Nice, good price, the guy indicated it worked well. When it arrived it was selectively gooped with what looked like a whit...

Go to advanced search