www.MG42.us

Oops. I miskeyed the date when I got this Lafette. I got it back in '04 or '05.

Here are some pictures of my MG34 Lafette that were taken when I got it back in '15. https://s25.postimg.cc/8ichf5clr/Dsc00052.jpg https://s25.postimg.cc/z3f0apmov/Dsc00053.jpg https://s25.postimg.cc/5pj9ujrin/Dsc00054.jpg https://s25.postimg.cc/wyun9lq73/Dsc00045.jpg https://s25.postimg.cc/s074v2eo...

Would love to see the pics, if you get a chance post them again. Thanks 42rocker OK. Here are the pictures now on postimg. Here are both together: https://s25.postimg.cc/d4xx2i5en/MVC-051_S_zpsdbeb7d7f.jpg https://s25.postimg.cc/s0wga393j/MVC-052_S_zpsd9baef03.jpg Here is the MG34 by itself: https:...

I have two registered, fully functional, MG34s. One is a DOT 45 and is civilian transferrable. The other is a DOT 44 and a dealer only "Post Sample". Both of my MG34s were manufactured by the Bruno Works in Czechoslovakia using tooling that came from Steyr. My DOT 44 MG34 is the one pictured below w...

1. re-profile the OOW supplied BBL to match a known profile(weight) that is known to work, i.e, similar to the Norwegian conversion BBLs, and then run a finishing reamer back in the chamber (proper 7.62NATO reamer) to re-throat the leade. As I already have two of the OOW barrels and it would be mor...

Does anyone out there have experience getting the Ohio Ordnance Works MG34 .308 conversion kit to work in a FA MG34. They haven't marketed these in years, but they consist of a.308 barrel, .308 belt, special booster, shortened feed tray, and reworked feed pawls. All the parts install nicely with no ...

Look closely at the picture of the Norwegian feed tray above. Does anyone see anything strange about it? Look again....Notice the front of the tray. It was originally modified to feed 30-06 and the MG34 receiver was hogged out to fit the tray. The tray pictured will not fit onto a standard MG34. I h...